GLAMOUR VIRGIN

Active foam with a neutral pH and a pleasantly fruity scent, designed for washing cars protected with hard waxes or ceramic coatings. This dense foam is long-lasting, easily removes all road grime, and adds shine. The product is designed for use with foaming machines.

How to use:

• Hand washing: Before washing, thoroughly rinse the vehicle to remove any sand, salt, or other contaminants that may impede washing or scratch the paintwork. Wash with a sponge and a bucket of clean water. Rinse thoroughly with water after washing.
• Pressure washing: Using a sprayer or foam can, apply the solution to a dry surface and leave for 1-3 minutes. Wash from the bottom up to avoid rinsing the foam from the lower parts of the vehicle without using pressure. Finally, rinse thoroughly with water under pressure.

Dosage
Depending on the type of wash and the degree of soiling, use the following solution:

• 5-10% pressure washing (50-100 ml of the product per 1L of solution)
• 15-30% PA foam can (150-300 ml of the product per 1L of solution)
• 2-4% Hand wash (20-40 ml of product per 1 L of solution)

Storage
Keep out of reach of children, in a dry place, at temperatures between -5°C and 30°C.

Recommendations/precautions

• apply to a dry surface.
• do not apply to a hot surface.
• do not allow to dry.